The basic FS380 is equipped with an electromagnetic brake, CA4 film carriage and a standard operating panel, offering you all possible functionalities and 6 free programmable settings. The ability to build your own tailormade machine, with modules and options, gives you the flexibility to pay no more than you need. In addition, options end modules are easy interchangeable, that makes you can easy change or add on later, when needed. The FS380 series, due to their wrapping speed and in combination with the chosen composition, these machines are the perfect.
Standard programs
• Standard cycle: Up & Down
• Single cycle: Up or Down only
• Cycle with pre-set position of carriage at start and stop.
• Cycle at pre-set height using Altimeter, without photocell.
• Reinforcement cycle, with programmable number of wraps.
• Stepping cycle, moving the carriage in steps up and down.
• Manual wrapping, operated from the Operating Panel.
|
Standard Equipment and Functionalities |
|
Base frame 75mm and Turntable Ø 1.650mm |
|
Max.: load of 2.000Kg / pallet size: 1.000x1.200mm |
|
Mast for max. wrapping height of 2.500mm |
|
Standard Operating Panel with 6+1 programs with emergency stop and reset buttons (CE) |
|
Film carriage with Electromagnetic brake, for 500mm wide machine rolls, controlled from the Operating Panel |
|
Soft start / soft stop by frequency controller |
|
Acoustic signal at start of each wrapping cycle |
|
Wrapping speeds controlled by frequency control |
|
Film carriage fitted with fall and foot safety protection |
|
Package detection by photocell or altimeter for manual (pre-set) max. height setting. |
