A483, Pneumatic steel strapping tool is the most rugged pusher type tool, ideal for strapping steel coils, tubes and rods in all positions. It can be fitted with four different suspension brackets.  

    Request Quote

    A483 is available in  two models, its main application is with 25 and 32 mm wide steel straps. Its pneumatically raised feed wheel greatly assists the introduction of heavy steel straps. The A483 has proved its worth especially under shift and continuous working conditions.



    • Pneumatic pusher-type combination tool for continuous and shift operations demanding a high working reliability
    • Strap dimensions
      25.0 - 32.0 x 0.80 - 1.00
      1.0 - 1 1/4 mm / .031 - .040"
    • Strap Qualities
      Uniflex up to 850 N/mm2
      Ultraflex up to 1100 N/mm2


    • The most rugged pusher type strapping tool of its kind for continuous and shift operations demanding a high working reliability
    • High performance machine with an outstanding record of performance in the steel and non ferrous industries
    • The perfect double notch upcut seal joint is accomplished in one operation
    • Inserting of the strap into the tools is easy since the feed wheel is lifted pneumatically and no operator effort is required
    • Four different suspension brackets are available thus allowing the tool to be
      mounted in any possible suspension position


    Strapping Qualities Uniflex and Ultraflex max. 1100 N/mm2 / 160'000 psi
    Strapping Dimensions width 25.0 - 32.0 mm / thickness 0.80 – 1.00 mm
    Weights 18.0 kg without suspension / 19.5 kg with suspension
    Average seal strength approx. 75%
    Seals Overlap seals, see chart
    Type of joint Double notch upcut joint
    Strap tension 7000 N and 9000 N


    Data sheet