Strapping Tools

    Avoid Major Repairs on Your Strapping Tools: How Maintenance Saves You Time and Money

    Rick WilliamsPosted on November 06, 2019

    Share

    Text Size

    - +

    Many people live “if it ain’t broke, don’t fix it.” Often, they misinterpret this to mean that you should wait until a machine or strapping tool breaks to do any maintenance on it.

    While you can’t always prevent repairs, you can usually avoid major breakdowns and lost productivity by doing just a little preventive maintenance. Here’s how taking a few small steps to maintain your strapping tools can save you both time and money.

    Preventive Maintenance Avoids Major Breakdowns

    Every machine will eventually need maintenance and repair. For strapping tools in your workplace, tensioners, cutters, and sealers may need attention. Important parts such as motor bearings might need to be replaced after so many cycles from wear and tear.

    Wear and tear is unavoidable, but it doesn’t mean you have to wait for the tool to stop working before running maintenance. In fact, replacing parts and cleaning the tool on a regular basis help keep it in good working order.

    Preventive maintenance helps you avoid major breakdowns, where the tool stops working altogether and it may be days before you get it working again. Those breakdowns cost your team, because they mean more downtime. Downtime is lost productivity, which impacts your business’s bottom line.

    Preventive Maintenance Extends Tool Life

    The other major reason preventive maintenance for a strapping tool is so important is that it can actually extend the life of your equipment.

    A poorly maintained tool may break down more often, sometimes in such a way that makes it too expensive to fix. You might find you’re replacing tools every two years, instead of every five or so.

    A good maintenance plan extends the life of the tool by keeping it in good working order longer. Strapping tools are no small investment for most plants, so protect your investment with regular maintenance.

    Good Maintenance Means Better Tool Performance

    A dirty strapping tool or dull cutters can spell trouble for your strapping team. The tool may not function as well as it should, which could lead to poor strapping jobs. Your team might end up strapping the same shipment two or three times before it’s done right. That wastes time and money and reduces your productivity.

    This also leads to more wasted materials, which run up your costs.

    It may also cause an increase in damaged shipments or products. In turn, you might discover you’re handing out more credits or refunds, or writing off more damaged product as it’s returned to you from upset customers.

    When your strapping tools are kept clean and working properly, your team will be able to get the strapping done right the first time.

    Well-Maintained Tools Are Safer

    Another way strapping tool maintenance saves you time and money is by reducing the potential for injury.

    A poorly maintained strapping tool is simply not as safe, leading to increased risk of injury. For example, dull blades might encourage employees to put their fingers nearer to sharp parts, twist or pry tools, or to try and remove jams.

    Finally, the poorly maintained strapping tool doesn’t perform as well. This means your team has to work harder. They might have to reapply strapping to the same shipment or use more force to apply a seal or tension the strap properly. This leads to heightened fatigue, job satisfaction and  also increases the risk of injury on the floor.

    Worker injuries cost you time and money. You may need to hire more people to cover for an injured worker, or you may be fined for the incident. Finally, you’ll also lose productivity when someone gets hurt on the job.

    Invest in a Preventive Maintenance Program

    As you can see, keeping your strapping tools in good working order is key to safety, productivity, and cost-savings. Invest in your maintenance, and see the difference it makes for your plant.

    Rick Williams

    Rick Williams has been employed in the packaging industry for the past 35 years, with a primary focus in the areas of semi-automatic and automatic equipment sales in conjunction with a wide variety of strapping tools. Rick is well-versed in consumable sales and their applications and has taken part in several packaging-related sales training and equipment forums over the years. In his spare time, Rick enjoys golfing and spending time with friends and family. He has also recently taken up recreational snowmobiling, although the lack of snow has not been favourable to enjoy the hundreds of miles of groomed trails Southern Ontario has to offer.

    Subscribe to Email Updates